Shihlin electric SC3-043-2.2K User Manual

Application parameter group
PARAMETER DESCRIPTION 152
5.10.7 The dead time of positive and reverse rotation
 Set the waiting or holding time after the output frequency outputs to 0Hz when the positive and reverse rotation is
switching.
Parameter
Name
Factory
Value
Setting Range
Content
10-16
P.119
The dead time of
positive and reverse
rotation
0.0s
0
Without the function.
0.1~3000.0s
The waiting or holding time after the output frequency
decreases to 0 when the positive and reverse rotation is
switching.
The dead time of positive and reverse rotation

When the inverter is running and receive the reverse rotation reference, the output frequency will decrease to 0 in
the process of switching from the current rotation direction to the opposite rotation direction. The dead time of
positive and reverse rotation is the waiting or holding time after the output frequency decreases to 0.
The diagram is as follows:
Output
frequency
The positive rotation
The reverse rotation
Time
The dead time of
positive and
reverse rotation
5.10.8 Energy-saving control function V/F
 Under the energy-saving running mode, the inverter will control the output voltage automatically in order to reduce
the output power losses to the minimum when the inverter is run at a constant speed.
Parameter
Name
Factory
Value
Setting Range
Content
10-17
P.159
Energy-saving control
function
0
0
Normal running mode.
1
Energy-saving running mode.
Energy-saving mode

Under the energy-saving running mode, the inverter will control the output voltage automatically in order to reduce
the output power losses to the minimum when the inverter is run at a constant speed.
Setting
Setting

Shihlin electric SC3-043-2.2K Specifications

General

Brand	Shihlin electric
Model	SC3-043-2.2K
Category	Inverter
Language	English