Shure Microflex MXCW - Resetting System Devices

Shure Incorporated
63/86
•
•
•
•
1.
2.
•
•
Resetting Devices
Shure devices are designed to work together right out of the box. Prior to a new installation, or during troubleshooting, it may
be useful to reset devices to ensure system compatibility.
The system provides 2 reset levels to choose from:
Network reset: Clears only network settings and provides a fresh network connection.
System reset: Clears all device and system settings to reset the device to default factory settings.
From the Hardware
Access Point
Press and hold the recessed reset button.
Network reset: Press and hold for 5 seconds to reset any network settings and refresh
network connection.
System reset: Press and hold for 10 seconds to reset the device to default factory set
tings.
See Access Point Transceiver (MXCWAPT) for more details on LED behaviors during a
reset.
Conference Units
Access the technician menu by tapping the gear icon. While at the top of the set
tings page, hold down the volume control knobs and tap the right side of the screen.
Go to the information screen and tap Factory reset.
Networked Charging Sta
tion
Press and hold the recessed reset button.
Network reset: Press and hold for 4 seconds to reset any network settings and refresh
network connection.
System reset: Press and hold for 8 seconds to reset the device to default factory set
tings.
From the Software
Access Point
Go to Settings > Device reset . Select Reboot device or Restore facto
ry defaults.
Conference Units
Go to Devices and select a device. From the device properties panel, open
more options and select Factory reset.