Shure Incorporated
7/86
1.
2.
3.
4.
1.
Set Up Wireless Conference Units (MXCW640)
Insert a fully charged Shure SB930 rechargeable battery and connect the MXC400 series microphone.
Press and hold the power button on the bottom of the device until the screen powers on.
Wait while the microphone device searches for the default access point network (00).
The devices are ready when the LEDs briefly flash green and the touchscreen displays the home-screen.
Perform a Soundcheck
Press the speak button on one of the devices to activate the microphone.
To Next Page
Loading...
