Shure Microflex MXCW - System Specifications: Latency, Frequency Response, and Distortion; Latency and Frequency Response Details; Total Harmonic Distortion and Dynamic Range; Digital Signal Processing and Audio Polarity

Shure Incorporated
65/86
Specifications
System
Latency
Microphone Input to Speaker/Headphone Output 16 ms
Microphone Input to Analog Output 9.2 ms
Analog Input to Speaker/Headphone Output 7.7 ms
Frequency Response
Headphone Output 100 Hz20 kHz (+0.5 dB/3 dB)
Speaker Output 220 Hz15 kHz (±10 dB)
Total Harmonic Distortion
Headphone Output 0.06%, typical
Speaker Output 1%, typical
Dynamic Range
Headphone Output 100 dB (Aweighted), 97 dB (Unweighted), typical
Speaker Output (unweighted), typical 94 dB (Aweighted), 91 dB (Unweighted), typical
Digital Signal Processing
24bit, 48 kHz
Audio Polarity
Positive pressure on MXCW640 microphone diaphragm produces positive voltage on pin 2 of MXCWAPT
XLR output
Working Range
8 m (Low), 15 m (Medium), 30 m (High), 45 m (Maximum )
Line-of-sight to the MXCWAPT. Actual range depends on RF signal absorption, reflection, and interference.
Security
AES Encryption (Dante and 802.11 a, g)
MXCWAPT
Analog Input
Maximum Input Level
Line 24.9 dBV
Aux 10.3 dBV
1% THD+N, Dante Output