Shure Microflex MXCW - MXCW640 Headset Input and Speaker Output Specs; Headset Microphone Input Specs; Speaker Output Specifications

Shure Incorporated
70/86
Input Impedance
26 kΩ
Configuration
Unbalanced
Type
Multipin Female Gooseneck Socket
Pin Assignments
Proprietary Shure Pinout
Remote Caller Input
Maximum Input Level
1.6 dBV
Measured at Dante Output
Frequency Response
30 Hz 20 kHz (+0.5 dB/3 dB
Measured at Dante Output
Total Harmonic Distortion
0.07%, typical
Measured at Dante Output
Dynamic Range
95 dB Aweighted , 93 dB Unweighted, typical
Measured at Dante Output
Preamplifier Equivalent Input Noise (EIN)
106 dBVAweighted, typical
Input Impedance
3.5 Ω
Configuration
Unbalanced
Type
TRRS 3.5 mm female socket
Pin Assignments
CTIA/AHJ Standard Pinout
Tip= Left side earpiece, Ring 1= Right side earpiece, Ring2= Ground, Sleeve= Microphone