SICK CFP CUBIC

OPERATING INSTRUCTIONS | CFP CUBIC 8021989 / 2017-10-20 | SICK AG
Subject to change without notice
20
8 OPERATION
8 Operation
8.1 Display and pushbuttons
All lengths specied in the menu refer to the end of the probe and/or with a congured
offset (see “8.5.11 Setting the offset”) to the tank bottom.
8.1.1 Variants with two switching outputs
1000 mm
39.4 in
Q1 Q2
Arrow pushbuttons: For navigating in the menu and changing values
Set pushbutton: For saving and conrming
Esc pushbutton: To exit the operating menu one step at a time
Note:
The status of the switching outputs is indicated in millimeters by the bars above the
mm unit symbol. This display is not available when inches are selected as the unit.
8.1.2 Variants with four switching outputs
1000 mm
39.4 in
Q1/2/3/4
Arrow pushbuttons: For navigating in the menu and changing values
Set pushbutton: For saving and conrming
Esc pushbutton: To exit the operating menu one step at a time
8.1.3 IO-Link
For operation via IO-Link 1.1 with data storage, the following les can be downloaded
from www.sick.com:
− IODD le
− Description of the available telegram parameters
8.2 User and Exprt mode
The two menu structures User mode and Exprt mode are available for users. The Exprt
mode contains additional functions for advanced settings.
You can access the menu by pressing the Set pushbutton for at least three seconds.
8.2.1 User mode
The User mode makes it easy to commission many standard applications. The number
of parameters that can be set on the display is reduced.