SICK DT1000 User Manual

8.3 Interface menu group............................................................................... 61
8.3.1 Defining the switching point for distance value (distance to
object)....................................................................................... 61
8.3.2 Defining the switching hysteresis for the distance value...... 62
8.3.3 Defining the switching point active state for the distance
value......................................................................................... 62
8.3.4 Defining the switching window for the distance value.......... 63
8.3.5 Defining the switching window hysteresis for the distance
value......................................................................................... 63
8.3.6 Defining the switching window active status for the dis‐
tance value............................................................................... 64
8.3.7 Defining the switching point for the object speed value....... 64
8.3.8 Defining the switching point hysteresis for the object
speed value.............................................................................. 64
8.3.9 Defining the monitoring direction for the object speed
value......................................................................................... 65
8.3.10 Defining the switching point active state for the object
speed value.............................................................................. 65
8.3.11 Assigning a switching event to the service functions............ 66
8.3.12 Defining the active state for service functions...................... 67
8.3.13 Configuring the QA analog output.......................................... 67
8.3.14 Configuring the switching input.............................................. 68
8.3.15 Defining the active state for digital input............................... 68
8.4 Device menu group................................................................................... 69
8.4.1 Switching the laser on and off................................................ 69
8.4.2 Configuring the heater............................................................. 69
8.4.3 Defining the language............................................................. 69
8.4.4 Defining units of measure....................................................... 70
8.4.5 Adjusting the display contrast................................................. 70
8.4.6 Adjusting the display brightness............................................. 70
8.4.7 Defining the display orientation.............................................. 70
8.5 Communication menu group................................................................... 71
8.5.1 Configuring the serial interface.............................................. 71
8.5.2 Defining the RS-422 data transmission rate......................... 71
8.5.3 Defining the RS-422 data format........................................... 72
8.5.4 Setting the continuous RS-422 output.................................. 72
8.5.5 Defining the RS-422 output cycle time.................................. 73
8.5.6 Defining the RS-422 data protocol......................................... 74
8.5.7 Defining the distance value resolution for the RS-422 data
transfer..................................................................................... 74
8.5.8 Defining the speed value resolution for the RS-422 data
transfer..................................................................................... 74
8.5.9 Defining SSI coding................................................................. 75
8.5.10 Defining the distance value resolution for the SSI data
transfer..................................................................................... 75
8.5.11 Defining the IP addressing mode........................................... 76
8.5.12 Entering an IP address............................................................ 76
CONTENTS
8019329/12TZ/2019-03-28 | SICK O P E R A T I N G I N S T R U C T I O N S | DT1000 and DL1000
5
Subject to change without notice

SICK DT1000 Specifications

General

Brand	SICK
Model	DT1000
Category	Accessories
Language	English