SICK DT1000 User Manual

Parameter Factory setting
0.1:
0.1 mm
0.1 mm
1:
1 mm
10:
10 mm
100:
100 mm
Free input:
0.001 mm to 100 mm
8.5.11 Defining the IP addressing mode
Ethernet address assignment selection. The network address can be obtained either
dynamically using a DHCP server or set manually.
Parameter Factory setting
DHCP:
Automatic network address assignment
STATIC
STATIC:
Manual network address assignment
8.5.12 Entering an IP address
Display of the IP address and manual input in the event of non-dynamically assigned IP
address.
Parameter Factory setting
IP address 192.168.100.236
8.5.13 Entering a subnet mask
Subnet mask display and input.
8 REFERENCE
76
O P E R A T I N G I N S T R U C T I O N S | DT1000 and DL1000 8019329/12TZ/2019-03-28 | SICK
Subject to change without notice

SICK DT1000 Specifications

General

Brand	SICK
Model	DT1000
Category	Accessories
Language	English