Button Function Description
Menu Hold the button to go to the menu.
OK Confirms entries or switches to the next menu level of a selected
element.
Back Cancels entries (when held) or switches to the previous menu
level.
Edit Opens the input field for numerical value entry.
Info Opens an information window.
Forward Switches between multiple screens on one menu level or moves
parameter values to the right on scale entries.
Back Switches between multiple screens on one menu level or moves
parameter values to the left on scale entries.
Down Scrolls down in selection lists.
Up Scrolls up in selection lists.
7.3 Measured value displays
In normal operation, various measured values are shown on the device display. The For‐
ward and Back buttons can be used to switch between the specific measured value dis‐
plays.
7.3.1 Distance display
The distance display indicates the current measured distance value. This value is calcu‐
lated using the actual measured distance plus an optional distance offset value.
7.3.2 Signal level display
The signal level display represents the height of the received signal (RSSI). It can be dis‐
played as a bar graph or a numerical value.
The numerical signal level is output as a dimensionless value with number values
between 0 and 16383.
7.3.3 Temperature display
The temperature display shows the current inside temperature of the device.
7 OPERATION
50
O P E R A T I N G I N S T R U C T I O N S | DT1000 and DL1000 8019329/12TZ/2019-03-28 | SICK
Subject to change without notice
To Next Page
Loading...
Need help?
General
