2. Align the device taking into consideration the field of view (see "Typical reference
values during operation", page 55) and the application circumstances (see
"Installation requirements", page 21).
3. Connect the device to interfaces and supply voltage when disconnected from
voltage, see "Connecting the device", page 34.
✓
The Ready status LED lights up green.
4. Perform fine adjustment.
MOUNTING 5
8026021//2020-12-18 | SICK O P E R A T I N G I N S T R U C T I O N S | GLS611
27
Subject to change without notice
To Next Page
Loading...
