SICK offers prefabricated brackets which are suited for mounting the device in various
applications.
NOTE
Mounting accessories can be found on the product page.
The call is made via the SICK Product ID: pid.sick.com/{P/N}/{S/N}
{P/N} corresponds to the part number of the product, see type label.
{S/N} corresponds to the serial number of the product, see type label (if indicated).
Example 1: The pivoting bracket enables, for example, the device to be aligned in two
axes.
Figure 9: Pivot bracket, shown here with the RFU630-131xx
Example 2: Combination of SICK fastening elements
MOUNTING
5
8027750//2022-12-15 | SICK O P E R A T I N G I N S T R U C T I O N S | RFU63x
31
Subject to change without notice
To Next Page
Loading...
