SICK RFU63 Series - Page 32

1 2
3
6
3
5
4
4
7
Figure 10: Bracket made of VESA adapter plate, pipe elements and clamp connectors, device
can be aligned in three axes. Shown here mounted on the RFU630-131xx
1
VESA adapter plate part no. 2071862 with 2 M6 x 12 countersunk head screws, hexagon
socket (WAF4)
2
Hinged clamp part no. 2068919 with 4 x M6 x 12 cylinder head screws, hexagon socket
(WAF5)
3
Pipe, external diameter 30mm, length 1m, part no. 5327610
4
Sealing plug, outside diameter 30mm, part no. 5327613
5
Cross clamp, part no. 5327612
6
Base clamp, part no. 5327611
7
Base (e.g. plate, supplied by the customer)
NOTE
Dimensional drawings for SICK brackets and, if applicable, mounting instructions can
be found online at: www.sick.com
►
To do so, enter the 7-digit part number of the bracket in the search field.
Customer-supplied brackets
A supplied bracket must meet the following requirements:
•
Stable mounting device
– Orientation of the device changeable in the x- and y-axis
– The mounting device must be able to bear the weight of the device, including
connecting cables, in a shock-proof manner, see "Mechanics and electron‐
ics", page 90 in the technical data.
– In mounting situations with strong vibrations, it may be necessary to provide
shock mounts.
5 MOUNTING
32
O P E R A T I N G I N S T R U C T I O N S | RFU63x 8027750//2022-12-15 | SICK
Subject to change without notice