SICK UE403 - Page 3

Operating Instructions
UE403
8010854/WP71/2012-11-28 © SICK AG • Industrial Safety Systems • Germany • All rights reserved i
Subject to change without notice
Update
Update
Please take note of the following updates to this document!
Based on Machinery Directive 2006/42/EC, we have added the following supplementary
data or change notices on our product to the following document.
Scope
This document is an original document.
Cited standards and directives
The standards and directives cited in these operating instructions might have changed.
The following list indicates the standards and directives that might have been cited and
their successive versions.
Kindly replace the standards and directives cited in these operating instructions with the
successive versions listed in the table.
Previous standard or directive Successive standard and directive
Machinery Directive 98/37/EC Machinery Directive 2006/42/EC
Directive 93/68/EEC Directive 93/68/EC
EMC directive 89/336/EEC EMC directive 2004/108/EC
Low Voltage Directive 73/23/EC Low Voltage Directive 2006/95/EC
DIN 40050 EN 60529
IEC 536:1976 EN 61140
DIN EN 50178:1998-04/
VDE 0160:1998:04
EN 50178
EN 775 EN ISO 10218-1
EN 292-1 EN ISO 12100-1
EN 292-2 EN ISO 12100-2
EN 954-1 EN ISO 13849-1
EN 418 EN ISO 13850
EN 999 EN ISO 13855
EN 294 EN ISO 13857
EN 811 EN ISO 13857
EN 1050 EN ISO 14121-1
IEC 68, part 2-27 or IEC 68 EN 60068-2-27
IEC 68, part 2-29 EN 60068-2-27
IEC 68, part 2-6 EN 60068-2-6
prEN 50100:1 EN 61496-1
ANSI B11.19-1990 ANSI B11.19:2003:04, Annex D

WARNING