Siemens 2000 Administration Manual

Menu structureoptiPoint 410/420
106
Menu structure
The following table shows a concerned overview of the menu structure of the
optiPoint 410/420.
optiPoint 410/420
Menu Operation steps Explanation
|--- Administration?
| |--- 01=Configuration?
| | |--- 01=DHCP IP assign?
Æ page 21 Æ page 62
| | |--- 02=Terminal IP addr.?
Æ page 21 Æ page 80
| | |--- 03=Terminal mask?
Æ page 21 Æ page 80
| | |--- 04=Default route? Æ page 22 Æ page 62
| | |--- 05=VLAN method?
Æ page 22 Æ page 81
| | |--- 06=VLAN id?
Æ page 22 Æ page 62
| | |--- 07=QoS?
| | |--- 08=LAN port 1 mode?
| | |--- 09=LAN port 2 mode?
[1]
| | |--- 10=Fully qual sub num? Æ page 24 Æ page 79
| | |--- 11=Home subscriber pwd?
Æ page 24 Æ page 79
||
|
--- 00=End?
| |--- 02=Diagnostics?
| | |--- 01=Display test?
Æ page 25 Æ page 62
| | |--- 02=LED test?
Æ page 25 Æ page 72
| | |--- 03=Key test? Æ page 26 Æ page 68
| | |--- 04=Audio loop test?
Æ page 26 Æ page 59
| | |--- 05=RAM test?
Æ page 26 Æ page 75
| | |--- 06=ROM test? Æ page 26 Æ page 76
| | |--- 07=Ping Test?
Æ page 27 Æ page 74
| | | |--- 01=User specified IP
||||---02=Gateway?
||||---03=DL server address?
| | | |--- 04=Default Router IP?
| | | |--- 05=Route 1 Gateway IP?
| | | |--- 06=Route 2 Gateway IP?
||||---07=SNMP trap address?
| | | |--- 08=Terminal IP addr.?
||||---09=DNS Server?
| | | |--- 10=SNTP IP?
|||
|
--- 00=End?
| | |--- 08=Line Test?
Æ page 28 Æ page 72
| | |--- 09=SLK test?
[2]
Æ page 28 Æ page 77
||
|
--- 00=End?
|
|
--- 03=Start Phone?
[1] Only for optiPoint 410/420 economy plus/standard/advance available
[2] Only for optiPoint 420 Workpoints available

Siemens 2000 Specifications

General

Brand	Siemens
Model	2000
Category	Projector
Language	English