Step by Step
Setting Up the Telephone Preparing for Operation
14
Preparing for Operation
For the optiPoint 410/420 economy/economy plus/stan-
dard/advance follow the sequence described below.
The sequence for the optiPoint 410 entry is described
from Æ page 16.
optiPoint 410/420 economy/economy plus/
standard/advance
If problems are encountered during the initial start up,
or if you have queries on individual specifications, the
following chapters will be of help:
• For specialized information on the administration of
the optiPoint 410/420 see "Alphabetical Reference"
Æ page 58.
• o For descriptions of different configuration-related
situations, see "Administration scenarios"
Æ page 89.
• For error messages in the display of the
optiPoint 410/420 see "Error Messages" Æ page 30.
Entering the administration area
: Confirm to enter the Configuration Menu.
o Enter admin password
(default: 123456).
: Confirm.
The start up process sequence describes a stan-
dard case of configuration. Network configura-
tions that deviate from the standard case may re-
quire additional entries.
01=Configuration? >
To Next Page
Loading...
Need help?
General