Step by Step
Administration optiPoint 410 entry
34
Reset factory settings
For standard values, see Æ page 96.
Disconnect the red Western plug of the power supply
unit cable (Pos. 3 Æ page 12) or, if "Power over LAN",
disconnect the LAN cable (Pos. 1 Æ page 12) from the
optiPoint 410 entry for a few seconds.
Web-based Management Tool
Reset factory settings via the Web-based Management
Tool Æ page 42.
1. Open the Dialog „Factory Reset“.
Menu: Administrator Actions > Factory Reset
2. Click on the button „Restart“.
Function Codes
n Lift handset.
flm Press keys simultaneously.
o Enter the reset password (124816).
r Confirm the entry.
t Replace the handset.
The resetting can lead to the failure of all the
functions of the optiPoint 410 entry. Ensure that
you have all the necessary information for start
up Æ page 16.
To Next Page
Loading...
Need help?
General