Administration
19
Administration
The following pages describe how to make administration settings for the
optiPoint 410/420 in a HiPath 3000/5000 / HiPath 4000 system.
There are different ways to make settings:
• Locally on the telephone:
– optiPoint 410/420 economy/economy plus/standard/advance
Æ page 20
– optiPoint 410 entry Æ page 32
• Remote maintenance through LAN:
– Web-based Management Tool Æ page 42.
– Deployment Tool (for further information see "Administration Manual
Deployment Tool").
A few functions of the optiPoint 410/420 display module or
application module are administered directly on the display module or
application module Æ page 38 or Æ page 40.
The execution of the configuration and diagnostics jobs described below
require good knowledge of network technology as well as of network pro-
tocols, and they are normally carried out by network administrators.
For your support you will find some background information in the chapter
"Alphabetical Reference", Æ page 58.
The administration of an optiPoint 410/420 (locally or through re-
mote maintenance) is possible only if no conversation is being con-
ducted over this telephone.
The configuration and diagnostics jobs via the telephone are execut-
able with restrictions only.
Only the Web-based Management allows unrestricted access to all
configuration menuesÆ page 42.
To Next Page
Loading...
