Siemens 2000

Description of functions Alphabetical Reference
65
FTP Settings
• Only configurable on optiPoint 410/420 standard/advance and only re-
quired if a display module or application module will be used.
• Displays the location of the download file via the regarding Æ FTP-
Server.
• Following servers are available:
– Use main FTP Settings
–Use Æ LDAP FTP Settings
– Use Java FTP Settings
–Use Æ ENB FTP Settings
Æ page 50
FTP Username
• Enter the name defined in the Æ FTP server as user for accessing the
server.
• The name must match the Æ FTP Password.
• Valid values: 1 ... 24 characters.
• Standard name Æ page 96.
Æ page 50
G722 codec
• Only required if the Æ Codec „High quality preferred“ will be used.
• Compression Æ G.722 with best quality of the voice transmission.
• This compression procedure is only possible between optiPoint Work-
points.
Æ page 49
Gateway Address
• Enter the Æ IP address of the Æ PBX which operates with the
optiPoint 410/420.
Æ page 55
Gateway Port
• Enter the Æ Port-Number for communication with the Æ Gateway-
Server ein.
Æ page 55
H.225.0 RAS
• Enter the Æ Port-Number for transfer of H.225.0 RAS .
• Use: Registry and approval for Æ VoIP.
•Standard value Æ page 96.
Æ page 56