K
Kathleen FrazierAug 29, 2025
What to do if Siemens 6EP4135-0GB00-0AY0 reports a defective battery?
- Kkaren95Aug 30, 2025
If your Siemens UPS indicates a defective battery, check the fuse and the battery voltages.
To Next PageTo Next PageWhat to do if Siemens 6EP4135-0GB00-0AY0 reports a defective battery?
If your Siemens UPS indicates a defective battery, check the fuse and the battery voltages.
What to do if Siemens 6EP4135-0GB00-0AY0 UPS shows wrong battery polarity?
If the Siemens UPS indicates wrong battery polarity, check the battery connections to ensure they are correct.
What does insufficient charge level mean on Siemens 6EP4135-0GB00-0AY0?
The battery charge level is presently too low on your Siemens UPS to reach the set buffer capacity.
What does EEPROM write error mean on Siemens 6EP4135-0GB00-0AY0 UPS?
The Siemens UPS device is defective.
Why Siemens 6EP4135-0GB00-0AY0 input voltage is too high?
Siemens DC UPS is not operational.
Why can't I write to object on my Siemens Power Supply?
The Siemens Power Supply parameter is 'read-only'.
What to check if Siemens UPS battery connection is interrupted?
If the connection to the battery is interrupted in your Siemens UPS, check the connection and the fuse to ensure they are properly connected and functional.
What does battery temperature low mean on Siemens 6EP4135-0GB00-0AY0?
The Siemens UPS battery temperature is too low, resulting in reduced output current.
What does battery temperature high mean on Siemens 6EP4135-0GB00-0AY0 UPS?
The Siemens UPS battery temperature is too high, which will shorten the battery life.
How to fix Siemens UPS device temperature too low?
If the Siemens UPS reports a critically low device temperature, ensure a higher ambient temperature.
General| Output Voltage | 24 V DC |
|---|---|
| Output Current | 5 A |
| Output Frequency | 50/60 Hz |
| Battery Voltage | 24 V DC |
| Battery Type | Lead-acid |
| Efficiency | > 90% |
| Protection Class | IP20 |
| Type | UPS |
| Operating Temperature | 0°C to +40°C |
| Storage Temperature | -20°C to +60°C |
Essential safety notes for operating electrical devices and preventing personal injury.
Using SIMATIC STEP 7 in TIA Portal for SITOP UPS1600 configuration.
Introduction to the SITOP UPS Manager for monitoring and configuration.
Procedures for mounting and removing the SITOP UPS1600.
Procedures for mounting and removing SITOP UPS1100 battery modules.
Procedures for connecting input, output, and battery terminals.
Step-by-step guide for replacing batteries in SITOP UPS1100.
Safety class and degree of protection details.
