Measurements and Calculations
Import Images into the Summary
1. Press
to activate the measurement package.
2. Press
Report
to enter / exit report page.
3. Select
6XPPDU\
on the Touch or Imaging Screen.
4. Select the Display format from the Summary
Page.
5. Roll the trackball to the thumbnail image and
press the
Set
key to highlight.
Up to 20 images can be stored to the
Summary.
TIP
6. Roll the trackball to the desired image location
in the Image section and press the
Set
Key
to drop the image in report.
7. To Delete the image, move the cursor over
the image and press
Delete Image
Summary
46
To Next Page
Loading...
Need help?
General
