27 / 92
Siemens Actuators SAX.., SAY.., SAV.., SAL.. for valves CE1P4040en
Building Technologies Handling 2018-12-05
7 8
10 mm
3.1.3 Avoid missalignement on V..G41.. valves with fittings
Risk of burns from hot surfaces!
If you touch heated parts, you will get burns as result.
· Allow to cool parts.
· Wear protective gloves.
On threaded valves it’s possible that the actuator is missaligned on the valve due
to a collision with the fitting. If so, please take care for correct mounting, either by
turning the actuator or by adjusting the fitting (e.g. use a second sealing to change
fitting position).
To Next Page
Loading...
Need help?
General
