Siemens ELP 319 User Manual

Industry Mobility
Betriebsanleitung PZENTW A6Z08101637795/EN1/000/B 23
[7620] ELP 319 LANGE_THO A25000-X22-Q9-7-7620 of
DC013 20081022 Notice no.: 500000097465 33
Copyright (C) Siemens AG 1998 All Rights Reserved - 0000ZQ6U.doc
10.4 Linking the Detector Slides
The detector slides are linked to the detector rods using insulated fork heads (see Figure 12).
Insulating sleeves
Figure 12 Detector slide with insulated fork head
10.5 Adjusting the Detector Slides
The detector slide stroke of the ELP 319 end position detector can be continuously adjusted from
30 mm to 190 mm.
Since the mounting and fitting dimensions are identical, the ELP 319 end position detector can be
mounted on the same base plates and using the same rodding as the Bsg.ktr.26 point detector (see
Figure 13). The ELP 319 end position detector replaces all models of the Bsg.ktr.26 point detector.
Detector rod
Figure 13 Trackside arrangement of the ELP 319 end position detector

Siemens ELP 319 Specifications

General

Brand	Siemens
Model	ELP 319
Category	Security Sensors
Language	English