To Next Page

To Previous Page

Industry Mobility

Betriebsanleitung PZENTW A6Z08101637795/EN1/000/B 6

[7620] ELP 319 LANGE_THO A25000-X22-Q9-7-7620 of

DC013 20081022 Notice no.: 500000097465 33

7.2 Basic Safety Regulations

To protect staff and prevent physical damage to the ELP 319 end position detector, the following

regulations must be carefully observed. The personnel must be familiar with the contents of this

manual in order to ensure safe and correct handling of the ELP 319 end position detector.

DANGER

Preventive and corrective maintenance work is performed during

normal operations.

DANGER

When you remove the cover of the ELP 319 end position detector,

please take into account that the parts bearing a lightning symbol

are carrying a current.

• Before beginning work on the track, the appropriate safety measures must be applied in

accordance with the current railway regulations.

• All work is to be performed using only the tools, specialist equipment, test facilities and

materials prescribed.

7.3 Qualified Staff

Maintenance work on the ELP 319 end position detector is only to be performed by specially trained

and tested personnel authorised by the operator of the equipment to carry out the installation,

preventive and corrective maintenance of type ELP 319 end position detectors.

CAUTION

The current regulations for the prevention of accidents of the railway

operator must be observed and are not invalidated by this

document.

Siemens ELP 319 User Manual

Questions and Answers: