Siemens FS720 - Page 11

About this document
Revision history
1
11 |
248
Building Technologies
A6V10210390_m_en_
--
Fire Safety
2018
-
08
-
29
Version Edition date Brief description
h 2013-11-14 Edition: Introduction Package IP5
Change to date format according to ISO 8601
New:
Integrating fire control panel FC723:
● Arrangement of components in the Comfort housing
● Installation of card cage (2 slots)
Installation and wiring of module bus cards for AlgoRex migration:
● Line card (SynoLOOP) FCL7201-Z3
Corrections and additions:
● Note on Ethernet loop FN2008 added.
● RS485 module: Slot address assignment
Various minor corrections and adaptations
g 05.2012 Edition: Introduction Package IP4
● I/O card (horn/monitored) FCI2009-A1
● I/O card (remote transmission) FCI2007-A1
● Fiber optic cable network module (SM/MM) FN2006-A1/FN2007-A1
● Power supply unit (150 W) Version A5
● Power supply unit (150 W) Version A4 changed
f 06.2010 ● Revision history redefined and standardized
● Integration of PMI & mainboard FCM2027
● Modification of the Scalance modules to class B
● Installation of FN2008 and FN2009 revised (symmetry element removed)
● Integration of the remote EVAC-NL indicator and EVAC-NL mimic display
driver
● Pin assignment for event printer FTO2001-A1 changed
e 03.2010 Second edition MP3.0 XS for VdS:
● Assignment of manufacturer designation "Scalance" to BT designation
d 10.2009 First edition MP3.0 XS for VdS
Installation of:
● Card cage (5 slots) FCA2008-A1
● Connection module (card cage) FCA2006-A1
● Module bus cards
● Scalance module
c 03.2009 Second revised edition MP1XS
b 01.2009 First extended edition MP1XS
a 09.2008 First edition MP1XS