Siemens FS720 - Cover Cap

Overview
Operating unit, operating add
-
on and cover cap (packaging unit)
3
24 | 248
Building Technologies
A6V10210390_m_en_
--
Fire Safety
2018
-
08
-
29
1 Support plate
2 PMI & mainboard
3 Mounting holes of operating unit
4 Lug with securing clip for ribbon cable
5 Hinge
Supplied mounting material
4x M5 screws for securing the operating unit
2x M2.5 screws for securing the hinge of the operating unit
1x
ribbon cable for the connection from the PMI & mainboard to the periphery
board
Inscription set or inscription sheet (only for operating unit)
You will find additional inscription strips, e.g. for the operating add
-
on, in
document A6V10217440.
3.3.2 Cover cap
Figure 6: Rear view of cover cap
1 Distance pins
2 Fixing screw
1
2