Mounting and installing extinguishing control panels
Extinguishing terminal installation and wiring
6
72 | 248
6.4 Extinguishing terminal installation and wiring
6.4.1 Description
The extinguishing terminal XTO2001 is used for the indication and operating
functions of the extinguishing card. It is part of the operating add-ons for
extinguishing control panels and of the remote control panel. Every flooding zone
has its own extinguishing terminal. The extinguishing terminal can be used as a
primary Person Machine Interface installed in an extinguishing control panel or
separately as a secondary Person Machine Interface in its own housing. The
primary extinguishing terminal must always be present and, if possible, integrated
into the control panel. The secondary extinguishing terminal is generally installed
externally and is an additional terminal with full functionality.
The extinguishing terminal XTO2001 is used in the following components:
● Exting. terminal (1 sector) XCM2002-A2
● Exting. terminal (4 sectors) XCM2003-A2
● Extinguish. terminal (remote) XT2001-A2
Properties
● Supply via the extinguishing control panel
● Separate supply as secondary (remote) extinguishing terminal possible
● With a separate supply, monitoring for power loss, battery fault, and ground
fault
● Connection of a 3rd source of voltage [FR] possible
● Addressable via DIP switch
● 6 freely programmable 3-color LED indicators
● 28 permanently assigned 3-color LED indicators
● 4 dot matrix displays (5 x 7) for countdown display
● 10 operating buttons, 4 of which are freely programmable
● Prepared for the installation of a key switch
To Next Page
Loading...
