Siemens FS720 - Installing the Extinguishing Card

Mounting and installing extinguishing control panels
Installing the extinguishing card
6
71 |
248
Building Technologies
A6V10210390_m_en_
--
Fire Safety
2018
-
08
-
29
6.3 Installing the extinguishing card
Figure 38: Inserting the extinguishing card into the card cage
1 Card cage (1 sector exting.) FCA2046
2 Extinguishing card XCI2005
3 2x card guides
4 2x locking knobs
w The card cage (1 sector exting.) is pre-wired.
1. Unlock the card guides (3) by pulling the unlocking knobs (4) out.
2. Push the extinguishing card (2) into the card guides (3) as shown and apply
even pressure to the card to press it into the connector strips.
3. Lock both card guides (3) by pushing the unlocking knobs (4) in.
1
2
3
4