Siemens FS720 - Sounder Module; Installation

Installing, exchanging and connecting modules
Sounder module
7
202 | 248
Building Technologies
A6V10210390_m_en_
--
Fire Safety
2018
-
08
-
29
7.24 Sounder module
7.24.1 Installation
The sounder module FCA2005 is intended for installation in FS720 fire control
panels and can be installed as follows:
● Screwed, flat on the rear panel or on the mounting plate
● With the mounting feet FDCM291 from the scope of delivery on a U-rail TS35
The following figure shows the installation situation of the sounder module with a
U-rail.
Figure 120: Example installation of the sounder module on a U-rail
1 U-rail TS35
2 Mounting feet FDCM291
3 Sounder module FCA2005
1. Insert the two mounting feet (2) laterally in the sounder module (3). Both
mounting feet must be mounted.
2. Push the sounder module (3) with the mounting feet (2) against the U-rail (1)
until the mounting feet snap into place.
3. Wire up the sounder module according to the pin assignment.
X2
X1
X3
1
3