9
242 | 248
9 Concluding work
9.1 Insert printing paper
The printer can also be installed rotated 180°.
Opening the printer and changing the paper roll
1. Press and hold the green button.
2. Fold the cover down with the other hand. NOTICE! Ensure that the two lugs at
the top right and left of the cover do not break off.
3. Remove the reel of the old paper roll from the paper drum.
4. Place the new paper roll into the paper drum. Information: Please make sure
that the side that will be unwound is at the back of the drum and that the loose
end of the paper is facing upwards.
5. Pull the loose end of the paper up and out of the paper drum until it
approximately covers the green button.
6. Hold the end of the paper in position.
7. Fold the cover up and insert it back into the housing until you hear an audible
'click' sound.
8. Remove excess paper by tearing it along the serrated edge.
a The printer is ready.
You will find detailed information on inserting the paper roll in the manufacturer's
operating instructions. The operating instructions can be downloaded by entering
the manufacturer product number '915CW180100322' at
https://www.custom4u.it/.
To Next Page
Loading...
