Siemens FS720 - Key Switch (Kaba) FTO2005-C1

Installing, exchanging and connecting modules
Key switch (Kaba) FTO2005
-
C1
7
198 | 248
Building Technologies
A6V10210390_m_en_
--
Fire Safety
2018
-
08
-
29
Connection of event printer to RS232 module
Connector From printer To Terminal X3 of RS232 module
3 Data (white) => (X3) PIN 6 (CTS)
Data (brown) => (X3) PIN 4 (RXD)
Data (green) => (X3) PIN 2 (TXD)
Data (yellow) => (X3) PIN 5 (0 V)
Table 3: Pin assignment for RS232 module
7.21 Key switch (Kaba) FTO2005-C1
This component is installed in exactly the same way as for the operating units
with the PMI & mainboard FCM2004 and the PMI & mainboard FCM2027.
Figure 116: Installing the guard ring for the key switch on the foil side
1 Foil side of the operating unit
2 Guard ring for the key switch
1
2