Siemens FS720 - Fitting the EVAC-NL MIMIC Display Driver FT2003-N1

Installing, exchanging and connecting modules
Remote EVAC
-
NL and EVAC
-
NL mimic display driver
7
224 | 248
Building Technologies
A6V10210390_m_en_
--
Fire Safety
2018
-
08
-
29
7.32.2 Fitting the EVAC-NL mimic display driver FT2003-N1
Figure 134: Assembly of EVAC-NL mimic display driver FT2003-N1
1 EVAC-NL operating unit FTO2007-N1
2
Ribbon cable between EVAC-NL connector board and EVAC-NL
operating unit
3 EVAC-NL connector board FTI2002-N1
4 4 spacer bolts (15 mm) and fixing screws for securing housing
5 4 spacer bolts (15 mm) and fixing screws for fixing printed circuit board
X1/
FTI2002
Connection strip for supply, monitoring signals and RS485 connection
X2 Connections of LED mimic display indicator 1…17
X3 Connections of LED mimic display indicator 18…34
X4 Ribbon cable connection to EVAC-NL FTO2007
X5 Connections for mimic display operation
X400 Connection peripheral data bus, input
X402 Connection for peripheral data bus, output
4
5
2
1
3
X400
X5
X4
X1
X1
X3
X402
X2