Siemens FS720 - Operating Unit, Operating Add-On and Cover Cap (Packaging Unit); Operating Units and Operating Add-On

Overview
Operatin
g unit, operating add
-
on and cover cap (packaging unit)
3
23 |
248
Building Technologies
A6V10210390_m_en_
--
Fire Safety
2018
-
08
-
29
3.3 Operating unit, operating add-on and cover cap
(packaging unit)
The operating unit and the optional operating add-on are supplied together with the
cover cap as a separate packaging unit.
3.3.1 Operating units and operating add-on
The operating unit is part of every station. In the Comfort housing the operating unit
is installed in the upper section of the housing. The operating add-on is installed
either in the bottom part of the Comfort or Large housing or in an additional empty
housing.
In the operating units, MP3.0 uses the PMI & mainboard FCM2004 and also the
PMI & mainboard FCM2027. You will find detailed information about this in
document A6V10210368.
Figure 4: Rear view of operating unit (without options) with PMI & mainboard FCM2027
Figure 5: Rear view of operating unit (without options) with PMI & mainboard FCM2004
5
3
4
1
2
3
3
3
5
5
3
4
1
2
3
3
3
5