Making Calls
29
Step by Step
Trunk Flash
To activate ISDN-type services and features through the
network carrier’s analog trunks or those of other com-
munications platforms (such as "consultation hold"), you
must send a signal to the trunks before dialing the ser-
vice code or telephone number.
Precondition: You have set up an external connection.
Press the key. The LED lights up.
Select and confirm.
or
F>:
Enter the code.
D
Enter the service code and/or telephone number.
Program/Service
*
51=Trunk flash?
To Next Page
Loading...
