Siemens HiPath 3000 - Storing Station Speed-Dial Numbers

Saving Station Numbers, Functions, Procedures and Appointments
53
Step by Step
Confirm.
or
Select and confirm.
Storing Station Speed-Dial Numbers
You can store the ten numbers which you use the most
and dial them using your own station speed-dial num-
bers:
*
0 through
*
9 Æ page 41.
Press the key. The LED lights up.
Confirm.
or
FB;
Enter the code.
D
Enter the speed-dial number you wish to use (
*
0 to
*
9). If the speed-dial number is already in use, the pro-
grammed station number appears on the screen.
Confirm.
D
First enter the external code and then the external sta-
tion number.
Confirm.
or If you make a mistake:
Select and confirm. This deletes all entered digits.
US: Exit?
UK: End?
US: Another key?
UK: Program another key?
Simply press the key to dial a stored telephone
number Æ page 41.
If you have saved an internal station number
(=DSS call), the corresponding LED signals vari-
ous states Æ page 55, Æ page 81.
You can do this while a call is in progress.
Program/Service
*
92=Change Speed-dial?
US: Change?
UK: Change entry?
US: Save?
UK: Save entry?
Previous?