Special Functions in the LAN (PC Network)
93
Step by Step
Controlling Relays
If this feature is configured (contact the service person-
nel), you can also control relays Æ page 74 in other
HiPath 3000 communications platforms.
Select and confirm.
or
F=@
Enter the code.
D
Enter the (DISA) call number of the HiPath 3000 in
which the relay is to be controlled.
or
G
Confirm the entry.
D
Enter the (DISA) call number of the telephone from
which you wish to control the relay.
or
G
Confirm the entry.
Select and confirm.
or
or
FB9
or
GB9
Enter the code for "on" or "off".
:
...
=
Enter the relay.
Internal DISA?
*90=Control Relay On?
#90=Control Relay Off?
To Next Page
Loading...
