Step by Step
Using Other Functions
74
Controlling Relays
If this function has been configured (contact the service
personnel), you can turn up to four relays on and off to
control different facilities (such as a door opener).
Depending on how they are programmed, you can
switch the relays on and off or switch them on and have
them switched off automatically after a timeout.
Select and confirm.
or
or
FB9
or
GB9
Enter the code for "on" or "off".
:
...
=
Enter the relay.
Sensors (HiPath 3300/3350/3500/3550
Only)
If this function has been configured (contact the service
personnel), sensors detect signals, causing your phone
to ring and a message to appear on your screen.
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 RSM (system networking via PC
network) Æ page 93!
*90=Control Relay On?
#90=Control Relay Off?
To Next Page
Loading...
