Siemens HiPath 3000 - Monitoring a Room

Step by Step
Using Other Functions
68
Monitoring a Room
A telephone can be used to monitor a room. The func-
tion must be activated on the telephone that you want
to monitor.
Calling this telephone lets you hear what is going on in
the room.
Activating the telephone to be monitored:
Press the key. The LED lights up.
Select and confirm.
or
FAA
Enter the code.
You can either leave the telephone in speakerphone
mode or lift the handset and leave it directed towards
the noise source.
Deactivating the telephone to be monitored:
Press the illuminated key. The LED goes out.
or
I
Replace the handset.
Monitoring the room:
D
Enter the internal number if the telephone in the room
you wish to monitor.
Program/Service
*
88=Room monitor?
Program/Service