Siemens HiPath 3000 - Accepting a Call for Another Member of Your Team; Activating and Deactivating a Ringing Group

Step by Step
Using Other Team Functions
86
Accepting a Call for Another Member
of Your Team
You can accept calls for other telephones in your team
from your telephone even while engaged in another
call. To do this, contact the service personnel to find out
if a pickup group has been configured.
Precondition: You telephone rings briefly. The follow-
ing message appears on the display: "Call for:".
Confirm.
or
Press the key. The LED lights up.
F>@
Enter the code.
Activating and Deactivating a Ringing
Group
You can have calls for your telephone signaled audibly at
up to five other internal phones. The person who an-
swers first receives the call.
Saving, displaying, and deleting telephones for the ring-
ing group:
Press the key. The LED lights up.
Select and confirm.
or
FA: Enter the code.
Follow the display prompts (enter the internal station
number).
If you deactivate the audible tone for another
group or trunk, or deactivate it for all groups and
trunks to which you belong, a special dial tone
sounds when you lift the handset.
Pickup - group?
Program/Service
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 RSM (system networking via PC
network) Æ page 92!
Program/Service
*
81=Ringing group on?