Additional functions
121
Step by Step
The cordless system overwrites the "base name" dis-
play info as soon as an incoming or outgoing call is
made. In this case, the name of the base station only re-
appears after the handset has been switched off and
back on again.
Setting the base
You can define individual settings of your system with
your handset depending on the configuration of your
system.
v Open the handset’s main menu.
u v [Select the menu icon and confirm.
st [Select the menu item and confirm.
st [ Select the menu item and confirm.
> < [ Select the required menu item and confirm.
Note:
Can be set only when the menu item is visible. To
change see Æ Page 35.
Settings
Ï
System
Base Reset
To Next Page
Loading...
