Siemens HiPath 3000 - Conducting Calls - Basic Functions

Setting up the handset
29
Step by Step
Activating or deactivating the ringer
Deactivating the ringer
* Hold down the key until a confirmation tone is emitted.
The
Ø
icon appears on the display.
Activating the ringer
* Hold down the key until a confirmation tone is emitted.
Activating or deactivating the warning
tone
Instead of a ringtone you can activate a warning tone.
When a call arrives, you will hear a short beep instead
of the ringer setting.
If the handset is in a call pickup group, a pickup call is
also signaled by the warning tone.
Activating the warning tone
* Hold down the key until a confirmation tone is emitted.
Press the Display key within three seconds.
The warning tone is activated. The volume of the warn-
ing tone is coupled with the volume of the external ring-
er.
Deactivating the warning tone
* Hold down the key until a confirmation tone is emitted.
Beep on