Putting the Handset into Operation
18
Assembling plastic cover
Use the supplied plastic cover for the headset port
to achieve optimum sound in speakerphone mode.
Connecting a headset
Once the plastic cover has been removed, you can
connect a headset to the left side of the handset
using a 2.5 mm jack.
The headset volume is the same as the volume set
for the earpiece Æ Page 21.
Replace the plastic cover after using the headset to
achieve optimum sound in speakerphone mode.
Connecting a USB data cable
You can connect a standard USB data cable
with a mini B jack to the back of your hand-
set to connect the handset to a PC
Æ Page 124.
• Remove belt clip (if attached)
Æ Page 17.
• Remove battery cover Æ Page 15.
• Connect the USB data cable to the USB
port (1).
1
To Next Page
Loading...
