Siemens HiPath 3000 - Picking up a Call in a Call Pickup Group; Ending a Call

Step by Step
Making calls – the basic functions
46
Rejecting a call
If you do not wish to be disturbed, you can reject the
call.
Confirm the message displayed with one of the two dis-
play keys. The call is rejected and the caller hears the
busy tone. You are connected to the other party’s mail-
box (if configured) or can program a callbackÆ Page 43.
Picking up a call in a call pickup group
You can use your handset to pick up calls to telephones
within your call pickup group (set by the service engi-
neer). This is also possible when you are conducting a
call.
Prerequisite:
You hear that a telephone in your call pickup group is
ringing.
c Press and hold down the Talk key. The message "Call
for:" appears on the display .
Call the system menu.
> < [Select the menu item and confirm.
p Conduct the call.
Ending a call
a or k Press the on-hook key briefly or place the handset in the
charging shell.
The call charges are displayed, depending on the com-
munication system.
Reject call
Menu
Group Pickup?