Siemens LMV37.400A2 - Burner Identification Display; Resettable Startups Display

137/213
Building Technologies Basic documentation LMV37.4... CC1P7546en
HVAC Products 24 Info level 01.12.2009
24.2.3 Identification of burner
P
Vhmins %
Bild 32/0707
The display shows parameter
113: flashing on the
left, characters
._._ on the right.
Example: 113: ._._
/
reset
1…3 s
P
Vhmins%
Bild 33/0707
Press
/
reset
for 1…3 s to show the burner’s
identification.
Default setting:
- - - - - - - -
Example: 3
/
reset
or
ESC
P
Vhmins %
Bild 32/0707
Press
/
reset
or
ES
C
to return to the display of
parameters.
The burner’s identification can be set on the parameter level!
To the next parameter
Back to the previous
parameter
24.2.4 Number of startups resettable
P
Vh
min s %
Bild 3 4/ 0707
The display shows parameter
164: flashing on the
left, characters
._._ on the right, since display of
the number of startups may comprise more than 5
digits.
Example: Parameter
164: ._._
/
reset
1…3 s
P
Vhmins%
Bild 35/0707
Press
/
reset
for 1…3 s to show the number of
startups (resettable).
Example:
36
/
reset
or
ESC
P
Vh
min s %
Bild 3 4/ 0707
Press
/
reset
or
ESC
to show parameter 164
flashing again.
The number of startups can be reset on the parameter level!
To the next parameter
Back to the previous
parameter