Programming LOGO!
3.8 Configuring additional functions for LOGO! (0BA7 only)
LOGO!
Manual, 04/2011, A5E03556174-01
127
Deactivating the password from the LOGO!
To deactivate the password when LOGO! is in the following view, follow these steps:
6ODYH
!3DVVZRUG
1RUPDO
1. Move the cursor to "
①": Press or
2. Confirm "
①": Press OK
2OG
3. Enter the current password (for example: ZZ) and press O
K. The display now shows:
==
2OG
1HZ
4. Clear the password by leaving the input field blank. Press O
K to confirm.
The password is now cleared.
To Next Page
Loading...
