Technical data
A.18 Technical data: LOGO! Contact 24/230
LOGO!
346 Manual, 04/2011, A5E03556174-01
LOGO! Power
24 V / 1.3 A
LOGO! Power
24 V / 2.5 A
Installation On 35 mm DIN rail, snap-on
Dimensions in mm (WxHxD) 54 x 80 x 55 72 x 90 x 55
Approx. weight 0.2 kg 0.3 kg
A.18 Technical data: LOGO! Contact 24/230
LOGO! Contact 24 and LOGO! Contact 230 are switching modules for direct switching of
ohmic loads up to 20 Amps and motors up to 4 kW (without noise emission, hum-free). Both
modules have a built-in protective circuit for damping surges.
LOGO!
Contact 24
LOGO!
Contact 230
Operating voltage 24 V DC 230 V AC;
50/60 Hz
Switching capacity
Utilization category AC-1: Switching of ohmic loads at 55°C
Operating current at 400 V
Output with three-phase loads at 400 V
20 A
13 kW
Utilization category AC-2, AC-3: Motor with slip ring induction/cage
armature
Operating current at 400 V
Output with three-phase loads at 400 V
8.4 A
4 kW
Short-circuit protection:
Assignment type 1
Assignment type 2
25 A
10 A
Connecting leads Fine-wire with wire end ferrules
Solid wire
2 x (0.75 to 2.5) mm2
2 x (1 to 2.5) mm2
1 x 4 mm2
Dimensions (WxHxD) 36 x 72 x 55
Ambient temperature -25 ... +55 °C
Storage temperature -50 ... +80 °C
To Next Page
Loading...
