Siemens LOGO! Series - Technical Data: CM as Interface

Technical data
A.15 Technical data: CM AS Interface
LOGO!
Manual, 04/2011, A5E03556174-01
343
A.15 Technical data: CM AS Interface
CM AS Interface
Mechanical data
Dimensions (WxHxD)
Weight
Installation
36 x 90 x 58 mm
Approx. 90 g
on a 35 mm profile rail 2 module widths or wall
mounting, must be mounted as the last module on the
right of LOGO!
Power supply
Input voltage 30 V DC
Permissible range 26.5 ... 31.5 V DC
Reverse polarity protection Yes
Total current drain I
tot
max. 70 mA
Connections
Digital inputs (I) the next four inputs after the physical inputs of LOGO!
(I
n
... I
n+3
)
Digital outputs (Q) the next four outputs after the physical outputs of
LOGO!
(Q
n
... Q
n+3
)
I/O configuration (hex) 7
ID code (hex) F
ID1 code (hex) F (default, variable from 0 ... F)
ID2 code (hex) F
Bus connection AS interface in accordance with specification
Analog inputs (AI) none
Analog outputs (AQ) none
Climatic conditions
Ambient operating conditions 0 °C ... +55 °C
Storage temperature - 40 °C ... +70 °C
Electrical safety
Electrical data to AS interface specification
Degree of protection IP 20
Interference suppression Limit class A
Approval
IEC 61131-2
EN 50178
cULus to UL 508
CSA C22.2 No. 142