Siemens Moore 353 - Page 144

Factory Configured Options UM353-1
March 2003
4-12
Loop 01 (cont)
ODC - Operator Display for Controllers
P RG PTR - P Range Pointer ----- LOOP01.AIN1.OR
V RG PTR - V Range Pointer ---- LOOP01.PID.OR
INPUT P - Input P (Process) ----- LOOP01.AIN1.O1
INPUT S - Input S (Setpoint) ---- LOOP01.SETPT.O1
INPUT V - Input V (Valve) ------ LOOP01.A/M.O1
LOOP # - Loop# ----- 01
AOUT1 - Analog Output 1 Function Block
RG PTR - Range Pointer ----------- LOOP01.PID.OR
INPUT S - Input S ------------------ LOOP01.A/M.O1
Loop 02
SETPT - Setpoint Function Block
RG PTR - Range Pointer ------- LOOP02.AIN2.OR
INPUT TV - Input TV ---------- LOOP02.AIN2.O1
INPUT TC - Input TC ---------- LOOP02.A/M.O1
ESN - Exec. Seq. No.----------- 5
ALARM - Alarm Function Block
RG PTR - Range Pointer ------ LOOP02.AIN2.OR
INPUT P - Input P ------------- LOOP02.AIN2.O1
INPUT D - Input D ------------ LOOP02.SETPT.O1
ESN - Exec. Seq. No. --------- 10
PID - PID Controller Function Block
RG PTR - Range Pointer -------- LOOP02.AIN2.OR
INPUT P - Input P --------------- LOOP02.AIN2.O1
INPUT S - Input S ---------------- LOOP02.SETPT.O1
INPUT F - Input F ---------------- LOOP02.A/M.O1
INPUT A - Input A --------------- LOOP02.A/M.AS
ESN - Exec. Seq. No.------------- 15
A/M - Auto/Manual Function Block
RG PTR - Range Pointer ---------- LOOP02.PID.OR
INPUT A - Input A ----------------- LOOP02.PID.O1
ESN - Exec. Seq. No. ------------- 20
ODC - Operator Display for Controllers
P RG PTR - P Range Pointer ----- LOOP02.AIN2.OR
V RG PTR - V Range Pointer ---- LOOP02.PID.OR
INPUT P - Input P (Process) ----- LOOP02.AIN2.O1
INPUT S - Input S (Setpoint) ---- LOOP02.SETPT.O1
INPUT V - Input V (Valve) ------ LOOP02.A/M.O1
LOOP # - Loop # ----- 02
AOUT2 - Analog Output 2 Function Block
RG PTR - Range Pointer ---------- LOOP02.PID.OR
INPUT S - Input S ------------------ LOOP02.A/M.O1
StockCheck.com