What happens when the Siemens SIRIUS M200D response to temperature sensor overload?
The Siemens Controller issues a warning or trips based on parameterization in response to a temperature sensor overload.
General| Control Voltage | 24 V DC |
|---|---|
| Input Voltage | 24 V DC |
| Number of Digital Outputs | 8 |
| Product type designation | SIRIUS M200D |
| Operating Temperature | -25°C to +60°C |
| Storage Temperature | -40°C to +70°C |
| Relative Humidity | 95% (non-condensing) |
Introduces M200D motor starters, their types, and suitability for tasks.
Describes PROFIBUS DP and PROFINET IO interfaces for communication.
Explains PROFIenergy for energy saving and power flow measurement.
Details the M200D motor starter modules and available variants.
Compares functions for electromechanical vs. electronic motor starters.
Illustrates and labels the connections and controls on the motor starter.
Lists device functions for electromechanical and electronic starters.
Explains parameters like rated operating current, load type, and voltage failure protection.
Details functions for reversing starters, soft starters, and brake output.
Covers thermal motor models, trip classes, and temperature sensors.
Explains communication modes, commands, data plausibility, and message output.
Provides mounting rules, derating factors, and installation procedures.
Covers required components, cables, connectors, and wiring.
Explains how to configure using STEP 7, GSD files, and device names.
Provides an overview of device parameters and their dependencies.
Outlines the standard procedure for parameterizing and setting up the motor starter.
Lists software and hardware requirements for commissioning.
Explains the meaning of individual LEDs and their status combinations.
Details reading diagnostic data, evaluating interrupts, and slave diagnostics.
Covers response to faults and acknowledging faults.
Lists environmental, electrical, and mechanical specifications.
Provides dimensions, weight, and electrical ratings for motor starters.
Shows dimensional drawings of the motor starter module and communication modules.
Explains data formats, object numbers, error codes, and data set structures.
Lists order numbers for motor starter modules, communication modules, and accessories.
To Next Page