Siemens SIRIUS M200D - DS75 Logbook - Read Events

Appendix
A.1 Data formats and data sets
M200D PROFIBUS/PROFINET
Manual, 08/2014, A5E01577426A/RS-AA/004
199
Object No.
Trips - Messages
355 Process image error
365 Invalid parameter value
381 Self-test error (= device error)
1406 Cold start tripping
1201 Blocking protection has responded at startup
1202 Blocking protection has responded during operation
A.1.8
DS75 logbook - Read events
Byte
Data type
Meaning
Range of values
Increment
Entry 1 (= latest entry)
0 ... 3 Unsigned 32 Operating hours - device 0 ... 4 294 967 295 1 s
4 ... 5 Unsigned 16 Object number ± 0 ... 32767 1
Entry 2
6 ... 9 Unsigned 32 Operating hours - device 0 ... 4 294 967 295 1 s
10 ... 11 Unsigned 16 Object number ± 0 ... 32767 1
...
...
Entry 21
120 ... 123 Unsigned 32 Operating hours - device 0 ... 4 294 967 295 1 s
124 ... 125 Unsigned 16 Object number ± 0 ... 32767 1
The data record call "Logbook" returns the operating hour of the event that has occurred and
an associated object number for each entry. This data set can accommodate 21 entries.
When all locations have been overwritten, the oldest entry is overwritten again.
Note
The latest entry is entered at the first location of the data set. The remaining entries are
moved one entry up.