Functions
3.7 System monitoring
M200D PROFIBUS/PROFINET
62 Manual, 08/2014, A5E01577426A/RS-AA/004
Connector monitoring
3.7.5.1
The motor starter monitors whether the infeed connector on the line side of the motor starter
is plugged in. Connector monitoring is implemented by means of an input activated via a
jumper between pins 11 and 12, which informs the motor starter that the connector is
plugged in.
When you use the "connector monitoring" function, you have to connect pin 11 to pin 12 in
the connector.
① Temperature sensor monitoring
② Connector monitoring
To Next Page
Loading...
